Logo
programming4us
programming4us
programming4us
programming4us
Home
programming4us
XP
programming4us
Windows Vista
programming4us
Windows 7
programming4us
Windows Azure
programming4us
Windows Server
programming4us
Windows Phone
 
programming4us
Windows 7

Microsoft Visio 2010 : Connecting Shapes with Dynamic Connectors

6/13/2011 9:19:42 AM
You learned about four types of 1-D shapes that you can create with the Visio line tools. Although several of those line types can include curves or bends, those features are only present if you place them there. Visio also offers a line called a dynamic connector. When you use a dynamic connector, Visio automatically adds and removes bends in the line based on the positions of the shapes to which it’s glued.

In this exercise, you will perform some of the same steps you completed in the previous exercise but will use dynamic connectors in order to understand the differences in behavior.



  1. Click the Page-2 tab at the bottom of the drawing page to move to Page-2.


    Connector


  2. On the Home tab, in the Tools group, click the Connector button. Notice that the cursor changes to a black arrow and there is an arrow with two right-angle bends below it.

    Just as with the line tools you used in the preceding exercise, you’ll see that connection points appear on various shapes as you point near them with the Connector Tool.

  3. Drag from the connection point on the right center of the upper rectangle to the connection point on the left edge of the circle, and then release the mouse button.

    Just as in the preceding exercise, the line you’ve drawn shows red handles at its endpoints. However, unlike the previous line, a dynamic connector has an arrowhead on its destination end by default. The arrowhead in this graphic is largely obscured by the red handle, but when the dynamic connector is deselected, as in the following graphic, the arrowhead is visible.

  4. Draw another dynamic connector above the rectangle but do not glue either end to a shape. Even if you try to draw the connector as a straight line, notice that it appears to have a mind of its own. This will turn out to be one of the most useful characteristics of a dynamic connector, as you will see in subsequent steps in this exercise.

  5. Use the dynamic connector to draw a line from the connection point at the center of the octagon to the center of the long rectangle below it.

    Something very different happens compared to the preceding exercise where you performed the same step with the line tool. Even though the long rectangle does not contain any connection points, you can still glue a dynamic connector to the shape. Visio provides two visual cues: pop-up text appears above the rectangle, as shown in the following graphic on the left, and the border of the shape is outlined in red. When you release the mouse button, the connector appears as shown in the graphic on the right.

    You’ve just used something Visio calls dynamic glue to attach a connector to a shape without any connection points. As you will discover in the next step, you can do the same thing even if a shape has connection points, merely by pointing to a part of the shape where there aren’t any.

  6. Point to the interior of the octagon until the border of the selection rectangle lights up in red (the following graphic on the left shows the cursor inside the selection rectangle). Drag until the border of the triangle turns red and the words Glue to Shape appear, as shown on the right. Don’t release the mouse button yet.

    In the graphic on the right, even though the cursor (the plus sign) is above the center of the triangle, the dynamic connector once again seems to have a mind of its own and is connecting to the lower-left corner.

  7. Release the mouse button to observe that the dynamic connector has glued itself to points along the edges of the two shapes.


    Tip:

    Notice the blue control handles at each bend and in the middle of each segment of a dynamic connector. You can drag any of these control handles to relocate individual segments of the dynamic connector.


    With a few final steps, you will see the real value of a dynamic connector and learn the difference between static glue and dynamic glue.


    Pointer Tool


  8. On the Home tab, in the Tools group, click the Pointer Tool.

  9. Drag the circle up and to the right; drag the long rectangle below the octagon down and to the right; drag the triangle down until it touches the ellipse.

    The following graphics show the before (left) and after (right).

    Here are three key observations after moving the three shapes:

    • The connector between the upper rectangle and the circle has right angle bends but is still attached at exactly the same two connection points. This is an example of static glue, that is, glue that remains attached to a fixed point on a shape.

    • The connector between the octagon and the long rectangle now contains a right-angle bend. The tail of the arrow remains glued to the center connection point, another example of static glue, but you now see evidence of dynamic glue: the head of the arrow is still attached to the long rectangle but it is connected at a different place along the edge of the shape.

    • The connector between the octagon and the triangle is glued dynamically at both ends. Moving the triangle down caused the attachment point on the triangle to change. In this particular case, the connection to the octagon remained in the same place; however, a different set of shape movements can cause the dynamic glue to the octagon to change locations as well.


Note:

Save your changes to the Basic shapes drawing, and then close it.


Adjusting Dynamic Connectors

By default, dynamic connectors use right-angle bends as you saw in this exercise. You can change the appearance of a dynamic connector by right-clicking it and selecting one of three options: Right-Angle Connector, Straight Connector, or Curved Connector.

As you move shapes that are linked by dynamic connectors, Visio adjusts the connector segments. In addition, as noted in the tip after Step 7, you can manually adjust individual connector segments by dragging control handles. If at any point, a dynamic connector has too many bends or becomes convoluted, you can right-click it and then click Reset Connector. Visio redraws the connector with the minimum number of bends and segments to fit in the required space.

Other -----------------
- Microsoft Visio 2010 : Copying and Pasting Shapes & Connecting Shapes with Lines
- Microsoft PowerPoint 2010 : Working Together on Office Documents - Creating Office Documents on Windows Live
- Microsoft PowerPoint 2010 : Working Together on Office Documents - Setting Folder Permissions on Windows Live
- Visual Basic 2010 : XML Serialization
- Visual Basic 2010 : Objects Serialization (part 2) - Soap Serialization & Providing Serialization for Custom Objects
- Visual Basic 2010 : Objects Serialization (part 1) - Binary Serialization
- Microsoft Excel 2010 : Editing a Chart & Moving and Resizing a Chart
- Microsoft Excel 2010 - Choosing the Right Type of Chart & Creating a Chart
- Microsoft PowerPoint 2010 : Working Together on Office Documents - Working with Folders on Windows Live
- Microsoft PowerPoint 2010 : Working Together on Office Documents - Accessing Documents on Windows Live
 
 
Top 10 video Game
-   Minecraft Mods - MAD PACK #10 'NETHER DOOM!' with Vikkstar & Pete (Minecraft Mod - Mad Pack 2)
-   Minecraft Mods - MAD PACK #9 'KING SLIME!' with Vikkstar & Pete (Minecraft Mod - Mad Pack 2)
-   Minecraft Mods - MAD PACK #2 'LAVA LOBBERS!' with Vikkstar & Pete (Minecraft Mod - Mad Pack 2)
-   Minecraft Mods - MAD PACK #3 'OBSIDIAN LONGSWORD!' with Vikkstar & Pete (Minecraft Mod - Mad Pack 2)
-   Total War: Warhammer [PC] Demigryph Trailer
-   Minecraft | MINIONS MOVIE MOD! (Despicable Me, Minions Movie)
-   Minecraft | Crazy Craft 3.0 - Ep 3! "TITANS ATTACK"
-   Minecraft | Crazy Craft 3.0 - Ep 2! "THIEVING FROM THE CRAZIES"
-   Minecraft | MORPH HIDE AND SEEK - Minions Despicable Me Mod
-   Minecraft | Dream Craft - Star Wars Modded Survival Ep 92 "IS JOE DEAD?!"
-   Minecraft | Dream Craft - Star Wars Modded Survival Ep 93 "JEDI STRIKE BACK"
-   Minecraft | Dream Craft - Star Wars Modded Survival Ep 94 "TATOOINE PLANET DESTRUCTION"
-   Minecraft | Dream Craft - Star Wars Modded Survival Ep 95 "TATOOINE CAPTIVES"
-   Hitman [PS4/XOne/PC] Alpha Gameplay Trailer
-   Satellite Reign [PC] Release Date Trailer
Popular tags
Microsoft Access Microsoft Excel Microsoft OneNote Microsoft PowerPoint Microsoft Project Microsoft Visio Microsoft Word Active Directory Biztalk Exchange Server Microsoft LynC Server Microsoft Dynamic Sharepoint Sql Server Windows Server 2008 Windows Server 2012 Windows 7 Windows 8 windows Phone 7 windows Phone 8
programming4us programming4us
 
Popular keywords
HOW TO Swimlane in Visio Visio sort key Pen and Touch Creating groups in Windows Server Raid in Windows Server Exchange 2010 maintenance Exchange server mail enabled groups Debugging Tools Collaborating
programming4us programming4us
PS4 game trailer XBox One game trailer
WiiU game trailer 3ds game trailer
Trailer game
 
programming4us
Natural Miscarriage
programming4us
Windows Vista
programming4us
Windows 7
programming4us
Windows Azure
programming4us
Windows Server
programming4us
Game Trailer