Logo
programming4us
programming4us
programming4us
programming4us
Home
programming4us
XP
programming4us
Windows Vista
programming4us
Windows 7
programming4us
Windows Azure
programming4us
Windows Server
programming4us
Windows Phone
 
Windows Vista

Programming the Windows Script Host : Scripts and Script Execution

- How To Install Windows Server 2012 On VirtualBox
- How To Bypass Torrent Connection Blocking By Your ISP
- How To Install Actual Facebook App On Kindle Fire
3/4/2011 5:29:25 PM

Scripts are simple text files that you create using Notepad or some other text editor. You can use a word processor such as WordPad to create scripts, but you must make sure that you save these files using the program’s Text Only document type. For VBScript, a good alternative to Notepad is the editor that comes with either Visual Basic or any program that supports VBA (such as the Office suite). Just remember that VBScript is a subset of VBA (which is, in turn, a subset of Visual Basic), so it does not support all objects and features.

In a web page, you use the <script> tag to specify the scripting language you’re using, as in this example:

<SCRIPT LANGUAGE="VBScript">

With the Windows Script Host, the script file’s extension specifies the scripting language:

  • For VBScript, save your text files using the .vbs extension (which is registered as the following file type: VBScript Script File).

  • For JavaScript, use the .js extension (which is registered as the following file type: JScript Script File).

As described in the next three sections, you have three ways to run your scripts: by launching the script files directly, by using WSscript.exe, or by using CScript.exe.

Running Script Files Directly

The easiest way to run a script from within Windows is to launch the .vbs or .js file directly. That is, you either double-click the file in Windows Explorer or type the file’s path and name in the Run dialog box. Note, however, that this technique does not work at the command prompt. For that, you need to use the CScript program described a bit later.

Using WScript for Windows-Based Scripts

The .vbs and .js file types have an open method that’s associated with WScript (WScript.exe), which is the Windows-based front-end for the Windows Script Host. In other words, launching a script file named MyScript.vbs is equivalent to entering the following command in the Run dialog box:

wscript myscript.vbs

The WScript host also defines several parameters that you can use to control how the script executes. Here’s the full syntax:

WSCRIPT filename arguments //B //D //E:engine //H:host //I //Job:xxxx //S //T:ss //X


filenameSpecifies the filename, including the path of the script file, if necessary.
argumentsSpecifies optional arguments required by the script. An argument is a data value that the script uses as part of its procedures or calculations.
//BRuns the script in batch mode, which means script errors and Echo method output lines are suppressed.
//DEnables Active Debugging. If an error occurs, the script is loaded into the Microsoft Script Debugger (if it’s -installed) and the offending statement is highlighted.
//E:engineExecutes the script using the specified scripting engine, which is the scripting language to use when running the script.
//H:hostSpecifies the default scripting host. For host, use either CScript or WScript.
//IRuns the script in interactive mode, which displays script errors and Echo method output lines.
//Job:xxxxIIn a script file that contains multiple jobs, executes only the job with id attribute equal to xxxx.
//SSaves the specified WScript arguments as the default for the current user; uses the following Registry key to save the settings:
HKCU\Software\Microsoft\Windows Script Host\Settings

//TT:ssSpecifies the maximum time in seconds (ss) that the script can run before it shuts down automatically.
//XExecutes the entire script in the Microsoft Script Debugger (if it’s installed).

For example, the following command runs MyScript.vbs in batch mode with a 60-second maximum execution time:

wscript myscript.vbs //B //TT:60

Creating Script Jobs

A script job is a section of code that performs a specific task or set of tasks. Most script files contain a single job. However, it’s possible to create a script file with multiple jobs. To do this, first surround the code for each job with the <script> and </script> tags, and then surround those with the <job> and </job> tags. In the <job> tag, include the id attribute and set it to a unique value that identifies the job. Finally, surround all the jobs with the <package> and </package> tags. Here’s an example:

<package>
<job id="A">
<script language="VBScript">
WScript.Echo "This is Job A."
</script>
</job>

<job id="B">
<script language="VBScript">
WScript.Echo "This is Job B."
</script>
</job>
</package>

Save the file using the .wsf (Windows Script File) extension.


Note

If you write a lot of scripts, the Microsoft Script Debugger is an excellent programming tool. If there’s a problem with a script, the debugger can help you pinpoint its location. For example, the debugger enables you to step through the script’s execution one statement at a time. If you don’t have the Microsoft Script Debugger, you can download a copy from msdn.microsoft.com/scripting.

Using CScript for Command-Line Scripts

The Windows Script Host has a second host front-end application called CScript (CScript.exe), which enables you to run scripts from the command line. In its simplest form, you launch CScript and use the name of the script file (and its path, if required) as a parameter, as in this example:

cscript myscript.vbs

The Windows Script Host displays the following banner and then executes the script:

Microsoft (R) Windows Script Host Version 5.7 for Windows
Copyright Microsoft Corporation. All rights reserved.

As with WScript, the CScript host has an extensive set of parameters you can specify:

CSCRIPT filename arguments //B //D //E:engine //H:host //I //Job:xxxx //S //T:ss //X //U //LOGO //NOLOGO


This syntax is almost identical to that of WScript, but adds the following three parameters:

//LOGODisplays the Windows Script Host banner at startup
//NOLOGOHides the Windows Script Host banner at startup
//UUses Unicode for redirected input/output from the console

Script Properties and .wsh Files

In the last two sections, you saw that the WScript and CScript hosts have a number of parameters you can specify when you execute a script. It’s also possible to set some of these options by using the properties associated with each script file. To see these properties, right-click a script file and then click Properties. In the properties sheet that appears, display the Script tab, shown in Figure 1. You have two options:

  • Stop Script After Specified Number of Seconds— If you activate this check box, Windows shuts down the script after it has run for the number of seconds specified in the associated spin box. This is useful for scripts that might hang during execution. For example, a script that attempts to enumerate all the mapped network drives at startup might hang if the network is unavailable.

  • Display Logo When Script Executed in Command Console— As you saw in the previous section, the CScript host displays some banner text when you run a script at the command prompt. If you deactivate this check box, the Windows Script Host suppresses this banner (unless you use the //LOGO parameter).

Figure 1. In a script file’s properties sheet, use the Script tab to set some default options for the script.


When you make changes to these properties, the Windows Script Host saves your settings in a new file that has the same name as the script file, except with the .wshMyScript.vbs, the settings are stored in MyScript.wsh. These .wsh files are text files organized into sections, much like .ini files. Here’s an example: (Windows Script Host Settings) extension. For example, if the script file is

[ScriptFile]
Path=C:\Users\Paul\Documents\Scripts\Popup1.vbs
[Options]
Timeout=0
DisplayLogo=1

To use these settings when running the script, use either WScript or CScript and specify the name of the .wsh file:

wscript myscript.wsh

Note

Rather than setting properties for individual scripts, you might prefer to set global properties that apply to the WScript host itself. Those global settings then apply to every script that runs using the WScript host. To do this, run WScript.exe without any parameters. This displays the properties sheet for WScript, which contains only the Script tab shown in Figure 1. The settings you choose in the properties sheet are stored in the following Registry key:

HKLM\Software\Microsoft\Windows Script Host\Settings


Other -----------------
- Getting to Know the Windows Vista Registry - Finding Registry Entries
- Getting to Know the Windows Vista Registry - Working with Registry Entries
- Getting to Know the Windows Vista Registry - Keeping the Registry Safe
- Getting to Know the Windows Vista Registry - Understanding the Registry Files
- Getting to Know the Windows Vista Registry - A Synopsis of the Registry
 
 
Top 10
- Microsoft Visio 2013 : Adding Structure to Your Diagrams - Finding containers and lists in Visio (part 2) - Wireframes,Legends
- Microsoft Visio 2013 : Adding Structure to Your Diagrams - Finding containers and lists in Visio (part 1) - Swimlanes
- Microsoft Visio 2013 : Adding Structure to Your Diagrams - Formatting and sizing lists
- Microsoft Visio 2013 : Adding Structure to Your Diagrams - Adding shapes to lists
- Microsoft Visio 2013 : Adding Structure to Your Diagrams - Sizing containers
- Microsoft Access 2010 : Control Properties and Why to Use Them (part 3) - The Other Properties of a Control
- Microsoft Access 2010 : Control Properties and Why to Use Them (part 2) - The Data Properties of a Control
- Microsoft Access 2010 : Control Properties and Why to Use Them (part 1) - The Format Properties of a Control
- Microsoft Access 2010 : Form Properties and Why Should You Use Them - Working with the Properties Window
- Microsoft Visio 2013 : Using the Organization Chart Wizard with new data
- First look: Apple Watch

- 3 Tips for Maintaining Your Cell Phone Battery (part 1)

- 3 Tips for Maintaining Your Cell Phone Battery (part 2)
programming4us programming4us
Popular tags
Microsoft Access Microsoft Excel Microsoft OneNote Microsoft PowerPoint Microsoft Project Microsoft Visio Microsoft Word Active Directory Biztalk Exchange Server Microsoft LynC Server Microsoft Dynamic Sharepoint Sql Server Windows Server 2008 Windows Server 2012 Windows 7 Windows 8 windows Phone 7 windows Phone 8
programming4us programming4us
 
programming4us
Natural Miscarriage
programming4us
Windows Vista
programming4us
Windows 7
programming4us
Windows Azure
programming4us
Windows Server
programming4us
Game Trailer